Mold Remediation NYC
Mold remediation means containing the mold, removing it, and treating the area so it’s clean. Then we fix the moisture problem behind it, so it doesn’t come back. We handle jobs of any size, in any unit or building, across Manhattan, Brooklyn, Queens, the Bronx, Staten Island, and New Rochelle.
Request Your Mold Remediation Quote
Get a straight answer before we schedule a visit.
No obligation. We’ll call to confirm your appointment.
What’s Included in Mold Remediation
- A full inspection of the area, including a check for the moisture source behind it
- We seal off the work area with containment, so spores don’t spread to the rest of the unit or building
- We remove drywall, insulation, carpet, or anything else that’s too damaged to save
- We treat the surfaces that stay with an EPA-guided antimicrobial
- We clean the work area using HEPA filtration
- We dry the structure and do a final moisture check before we call the job done
- We provide Local Law 55 documentation for owners and boards, when it applies
- Lab-analyzed air or surface sampling. See our mold testing service
- A stand-alone visual inspection with no removal work. See our mold inspection service
- Water extraction from an active leak or flood. See our water damage restoration service
What is mold abatement?
Mold abatement means the same thing as mold remediation. It’s the hands-on work of removing mold and fixing the moisture problem behind it. Some people call it remediation. Others call it abatement, mitigation, or cleanup. Either way, the job is the same: inspect, contain, remove, and fix the cause.
Signs You Need Mold Remediation
Not every spot needs a full remediation job. These are the signs that usually do.
Visible mold growth on walls, ceilings, or around windows
A persistent musty smell that doesn’t go away after cleaning
A recent leak, flood, or long-term moisture problem in the area
Allergy or asthma symptoms that ease up when you’re away from home
The Mold Remediation Process, Step by Step
Contact & Scheduling
You tell us what you’re seeing or smelling, and where. We’ll get your inspection scheduled at a time that works for you, including board coordination if your building needs it.
Inspection & Moisture-Source Assessment
We take a hands-on look at the area. We check how much mold is there and find the moisture source behind it, before any work is scoped.
Containment, Removal & Treatment
We seal off the work area, then remove drywall, insulation, carpet, or anything else that can’t be saved. We treat the area with an EPA-guided antimicrobial and clean it using HEPA filtration.
Drying, Verification & Documentation
Industrial dehumidifiers dry the structure. We check that moisture levels are back to normal. You get documentation showing what we found and what we did.
Why does the process include drying and verification, not just removal?
If you remove the mold you can see but don’t dry the area and check the moisture level, the same conditions are still there for mold to grow back. The verification step is what makes the job actually finished, not just cleaned.
What Mold Remediation Costs
Cost depends on the specific job. Here’s what affects it:
- The size of the affected area and how many rooms are involved
- How easy the mold is to reach. Mold behind a wall or under flooring costs more to reach than mold on a visible surface
- How much material needs removing and replacing
- Whether Local Law 55 board documentation is needed for the job
An inspection gives you a real, specific number for your unit or building.
How We Reduce Your Risk
- A written scope of work before we remove anything, so you know exactly what’s being replaced
- The moisture source addressed as part of the same job, not billed as a separate visit later
Do I get a price before any work starts?
Yes. The inspection gives you a written scope of work with the price attached. You approve a real number before anything is removed. You’re never agreeing to an open-ended job.
Real Mold Remediation Results
Before and after: the same unit, before remediation and after the job was finished.
Before
After
Before
After
Licensed Mold Remediation Standards
Every remediation job follows the same licensed, standards-based process, no matter the unit or building size.
NY State Mold License (Article 32)
Remediation work follows New York Labor Law Article 32. We’re licensed through the NY State Department of Labor.
IICRC S520 Standard
Containment, removal, and treatment follow the ANSI/IICRC S520 standard for mold remediation.
EPA-Guided Practices
Our removal and cleanup steps follow current EPA guidance for handling indoor mold and moisture safely.
General Liability & Pollution Insured
Every crew we send out is covered under the same liability and pollution policy. It doesn’t matter if the job is one apartment or a whole building.
Can the same company both assess and remediate my mold?
No. New York Labor Law Article 32 keeps those two jobs separate. The company that assessed your mold can’t be the same one that remediates it. This rule stops a company from diagnosing a problem and then getting paid to fix it.
What NYC Property Owners Say About Our Remediation Work
They contained the whole kitchen before touching anything, so dust and spores never made it into the rest of the apartment. Genuinely appreciated that.
Our building’s super had painted over the mold twice before we called. This crew explained why that never works and finally fixed the actual leak behind it.
Our co-op board needed documentation for the insurer, not just a cleanup. They handed over paperwork we could actually submit without any back and forth.
Mold Remediation Questions, Answered
A remediation quote covers what the inspection found, the containment and removal plan, which materials are being replaced, the antimicrobial treatment, and the final drying and verification step. It’s not just a single labor number.
Most residential jobs are contained to the affected room, so the rest of the unit stays livable while we work. For larger jobs, or work affecting a bedroom or the only bathroom, we’ll talk through timing before starting.
Sometimes hidden mold behind a wall or under flooring only shows up once removal starts. If that happens, we stop. We show you what we found and confirm the new scope with you before we keep going. We never just expand the job without telling you.
Yes. The ANSI/IICRC S520 standard our technicians follow requires HEPA filtration during containment and cleanup. It’s the accepted way to control airborne spores during removal work.
That depends on your building’s alteration policy, not on us. Some boards need advance notice or sign-off for work on shared walls or plumbing chases. We’re glad to give your board or management company any documentation they ask for.
We bag and seal removed drywall, insulation, and other materials inside the containment area before carrying them out. This keeps spores from spreading through the rest of the building on the way to disposal.
If mold comes back in the same spot, it’s almost always because the moisture source wasn’t fully fixed. That’s why every remediation job here includes finding and fixing that source, not just removing the mold you can see.
Ready to Get Your Mold Remediation Quote?
Tell us what you’re seeing and where, and we’ll give you a real answer before we schedule anything.
Request Your Mold Remediation Quote
- NY DOL-licensed & insured (Article 32)
- EPA-guided, IICRC S520 process
- Serving Manhattan, Brooklyn, Queens, the Bronx, Staten Island & New Rochelle